JUKI IP-110 Instruction Manual page 31

Input port
Dsplay Settng range
: No settng
: H nput
 to 53
: L nput
: No settng
: H nput
 to 53
: L nput
- -
- -
- -
- -
Input port
Dsplay Settng range
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
– 29 –
Descrpton of command
Step moves to the next step after
progress of set angle, and moves to
skp destnaton step No. when all nput
condtons are completed (AND nput).
(Reference angle s the angle whch s off
from UP poston.)
Step moves to the next step after
progress of set angle, and moves to
skp destnaton step No. when any of
nput condtons s completed (OR nput).
(Reference angle s the angle whch s off
from UP poston.)
Stop command s output, and step moves
to the next step. When tme s set, step
moves to the next step after lapse of set
tme.
On/off of reverse sttchng swtch s set.
Command s executed wthout delay tme
at delay tme 0. For other set values,
reverse sttchng swtch s turned off after
lapse of back-tuck output "on" tme durng
set tme.
On/off of presser lfter swtch command s
set. Command s executed wthout delay
tme at delay tme 0. For other set values,
presser lfter swtch s turned "off" after
lapse of presser lfter output "on" tme
durng set tme.
Initialization of the step of specified
program No. The step of specified
program is forcibly returned to the first
step.
Intalzaton of step can be performed to
each program.