JUKI IP-110 Instruction Manual page 13

2
3
2) When changng the number of sttches of reverse sttchng, change t wth swtches 4 and 5 for settng
the number of sttches of A and B.
In addton, when changng the number of sttches of square sttchng, change t wth swtches 6 and 7
for settng the number of sttches of C and D.
(The range of the number of sttches that can be changed : A and B = 0 to 9 sttches, C and D = 0 to 99
sttches)
3) Press swtch 2 to set the reverse sttchng at the start of sewng.
No settng
4) Press swtch 3 to set the reverse sttchng at the end of sewng.
No settng
5) The sewng machne automatcally stops after completon of the process at processes C and D. At ths
tme, the sewng machne rotates at low speed when the touch-back swtch s pressed (compensaton
sttchng operaton). In addton, when the pedal s returned to the neutral poston and the front part of t s
depressed agan, the sewng can be contnued regardless of the settng of the number of sttches.
6) When automatc thread trmmng swtch 8 s selected, thread trmmng s automatcally performed after
completon of the last process. (When the reverse feed sttchng at the end of sewng s set, the reverse
feed sttchng at the end of sewng becomes the last process, and automatc thread trmmng s performed
after completon of the process.)
7) When thread trmmng prohbtng swtch 9 s selected, the sewng machne wll stop wth the needle up
wthout performng thread trmmng.
) When one-shot automatc sttchng swtch !0 s selected, automatc sewng s performed at the set speed
wthout a break by depressng the front part of pedal at processes C and D.
9) When the sewng machne s provded wth auto-lfter, the presser foot automatcally goes up after
completon of the process at processes C and D.
4 6
5 7
Reverse sttchng
at the start of sewng
Reverse sttchng
at the end of sewng
!0
8 9
Double reverse sttchng
at the start of sewng
Double reverse sttchng
at the end of sewng
–  –