Thread Trimming Prohibition Switch; Information; Operator Level; Sewing Management Information - JUKI IP-110 Instruction Manual

2-12. Thread trimming prohibition switch

• Ths swtch s used to temporarly make the thread trmmng functon noperatve.
The other performance of sewng machne s not affected by ths swtch.
(If the automatic reverse stitching (for end) is specified, the sewing machine will perform the automatic
reverse sttchng at the end of sewng.)
• If the automatc thread trmmng swtch
specified, the machine will not perform thread trimming but stop with its needle up.

3. INFORMATION

Settng and checkng of varous data can be performed wth the nformaton.
For the nformaton, there are the operator level and the mantenance personnel level.

3-1. Operator level

) Turn ON the power.
2) Press swtch 1 to dsplay the nformaton screen.
■ Information screen (operator level)

(1) Sewing management information

For the sewng management nformaton, there are the mantenance management functon, producton
control functon and workng measurement functon.
[Maintenance management function]
) Press 1 to dsplay the mantenance functon screen.
and the thread trmmng prohbton swtch
1
1
1
– 4 –
are both
1 : Sewng management
nformaton