JUKI IP-110 Instruction Manual page 29

Input port
Dsplay Settng range
- -
- -
- -
- -
- -
- -
- -
Input port
Dsplay Settng range
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
– 27 –
Descrpton of command
Max. speed lmtaton value of the sewng machne
can be set. The set speed lmtaton works wthn
the set delay tme and speed lmtaton command
s released after lapse of delay tme. Mnmum
number of revolutons does not become less than
the set value of functon settng No. 35 Mnmum
number of revolutons of pedal. Also, max. number
of revolutons does not become more than the set
value of functon settng No. 96 Max. number of
revolutons.
LSW (depressng front part of pedal) s prohbted.
Command s executed wthout delay tme at delay
tme 0. For others, LSW s nvald wthn the set
delay tme, and nput of LSW s effectve after settng
delay tme.
Thread trmmng operaton s performed. Command
s nvald at delay tme 0. For others, thread trmmng
command s output wthn the set delay tme.
Thread trmmng output s prohbted. Command
s executed wthout delay tme at delay tme 0. For
others, thread trmmng delay command s output
wthn the set delay tme, and released after lapse of
delay tme.
UP poston stop command (speed specfed
wth other command s neglected.) Command s
executed wthout delay tme at delay tme 0. For
others, UP poston stop command s effectve wthn
the set delay tme, and command s nvald after
lapse of delay tme.
When command s executed, f the needle s n
DOWN poston, t rotates to UP poston n the
normal rotaton, and vce versa. Speed specfed
wth other command s neglected. Command s
executed wthout delay tme at delay tme 0. For
others, command s effectve wthn the set delay
tme, and command s nvald after lapse of delay
tme.
Reverse revoluton to lft needle command When
command s executed, the machne s braked n
the reverse rotaton from the angle set wth functon
settng No. 9. Command s executed wthout
delay tme at delay tme 0. For others, command s
effectve wthn the set delay tme, and command s
nvald after lapse of delay tme.