JUKI IP-110 Instruction Manual page 27

Input port
Dsplay Settng range
- -
- -
: No settng
: H nput
 to 53
: L nput
: No settng
: H nput
 to 53
: L nput
: No settng
: H nput
 to 53
: L nput
: No settng
: H nput
 to 53
: L nput
- -
- -
Input port
Dsplay Settng range
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
: No settng
: H output
 to 7
: L output
– 25 –
Descrpton of command
End of program (ntal settng)
To next step after lapse of delay tme
Moves to next step when all condtons
specfed n the nput settng are completed
(AND nput). Jumps to the step set at skp
destnaton step No. when nput condtons are
not completed and delay tme has lapsed.
Moves to next step when any of condtons
specfed at nput settng s completed
(OR nput). Jumps to the step set at skp
destnaton step No. when nput condtons are
not completed and delay tme has lapsed.
Jumps to the step specified at skip destination
step No. when all nput settng condtons are
completed wthn the set value of number of
sttches settng (AND nput), and moves to
next step after number of stitches has finished.
Jumps to the step specified at skip destination
step No. when any of nput settng condtons
s completed wthn the set value of number of
sttches settng (OR nput), and moves to next
step after number of stitches has finished.
Repeats between the specified steps at jump
until repeat count value is over. Loops infinitely
at set value 0.
(Cauton) Do not perform the nest nput of ths
command.
Speed of the sewng machne can be set.
The machne runs at the set speed wthn the
set delay tme, and the speed command s
released after lapse of delay tme. Mnmum
number of revolutons does not become less
than the set value of functon settng No. 35
Mnmum number of revolutons of pedal. Also,
maxmum number of revolutons does not
become more than the set value of functon
settng No. 96 Max. number of revolutons.