JUKI IP-110 Instruction Manual page 18

1 : When 1 s pressed, the screen can be cleared. However, the counter tself cannot be cleared. In case
of the replacement of needle, the warnng screen s dsplayed at ntervals of 0 mnutes untl clearng
s performed. In case of other warnngs, the warnng screen s dsplayed at the tme of turnng ON the
power untl the counter s cleared.
2 : When 2 s pressed, the screen s cleared and the counter value s cleared as well. From ths tme,
countng starts newly.
[Setting of the warning setting time]
■ Infomation screen
) Press swtch 1 for approxmately three seconds n the nformaton screen.
■ Sewing management information selection screen
2) Press 2 to dsplay the mantenance functon screen.
(For other functons, refer to the Engneer's Manual.)
■ Maintenance function screen
3 : Input screen of tme of replacement of needle (number of sttches : unt : X ,000 sttches) s dsplayed.
4 : Input screen of tme of cleanng (tme : unt : h) s dsplayed.
5 : Input screen of tme of replacement of ol (tme : unt : h) s dsplayed.
6 : Input screen of number of tmes of thread trmmng (number of tmes : unt : tme) s dsplayed.
(The number of tmes of thread trmmng per count can be set when countng the number of peces of
sewng wth the output dsplay.)
1
2
3 4
5
6
– 6 –