JUKI IP-110 Instruction Manual page 24

■ Simplified program edit the 2nd screen
[Program command "AND" : standard settng]
7) Press swtches 5 and 6 to select nput ports (No.  to 53). Input port may not exst dependng on the
selected program command.
) Press swtches 7 and 8 to select nput state of the selected nput port (Low : true when nputtng Low,
Hgh : true when nputtng Hgh). Input logc of the nput port may not exst dependng on the selected
program command.
* Selecton of plural nput ports (No.  to 53) and the accompaned nput state s possble.
9) Press swtches 9 and !0 to select output ports (No.  to 7).
0) Press swtches !1 and !2 to select output state of the selected output port (Low : Low output when true,
Hgh : Hgh output when true). Output state can be set wth plural output ports.
* Selecton of plural output ports (No.  to 7) and the accompaned output state s possble.
) Press swtch !4 to display the simplified program edit the 1st screen.
■ Simplified program edit the 1st screen
[Program command "AND" : standard settng]
!1
5 7 9
!0 !2 !4
6 8
!1
!3
!2
– 22 –
!5
!6