Production Control Function - JUKI IP-110 Instruction Manual

■ Various input screen
(time of replacement of needle, time of cleaning, time of replacement of oil, and number of times
of thread trimming)
7
Press 7 to dsplay the clear checkng screen. (The screen s not dsplayed when nputtng the number of
tmes of thread trmmng.) After nputtng the set value, press 8 to determne.
In case of stopping the warning function, set the set value to "0".
It is possible to individually set replacement of needle, cleaning, and replacement of oil respectively.
In case of stopping all, set "0" to each.

(2) Production control function

) Press 1 to dsplay the producton control screen.
■ Production control screen
[Explanation of the respective items]
Number of pcs. of current target ................................. Unt : Pece
Number of pcs. of final target ...................................... Unt : Pece
Current output ............................................................. Unt : Pece
Tme requred to sew one pece (ptch tme) ............... Unt : Second
Ths tem dsplays that the measurement s stopped.
2) Press 2 , 3 , 4 and 5 to dsplay the producton control nput screen.
1
3
2
4 5
– 7 –
8
Ths tem dsplays that the measurement s
beng performed.