Summit Wm Controller Wm200/2000 Leds - Extreme Networks Summit WM Technical Reference Manual

Summit WM Controller diagnostics
Table 13 shows the system capacities for each license.
Table 13: Summit WM Controller WM200/2000 system capacity
Number of APs
Number of Users
Number of WM-Access Domains
Number of Voice calls
Maximum Throughput
Part Number

Summit WM Controller WM200/2000 LEDs

The SME is the main entity in charge of system monitoring and state reporting. The LED states for the
card represent the system states.
Figure 7: System LED diagram
Seven-segment
display
The reported states for the Summit WM Controller WM200/2000 are:
Run LED – This indicator indicates CPU activity. Once CPU initialization is complete, the Run LED
●
blinks with CPU activity.
Activity LED – This indicator will be turned on upon application (SMT) start. It indicates that the
●
system in now under application control. It also indicates health monitor for app/system
initialization and provides a reset context for error codes.
Warning/Error LED – The Yellow (Warning) and Red (Error) indicators are ALARM LEDs signalling
●
a problem state. These LEDs are used by the application to indicate the running state of the system.
The corresponding error code is displayed in the SSD and a corresponding error alert is provided in
through the Log system.
The Seven-Segment Display (SSD) is used to provide information about startup or processor load.
66
WM200
100 (50 as shipped with base license;
50 with capacity upgrade license)
2048
32
200
2Gbps
15955: Controller with base license
ERROR
ACT LED
LED
Reset WARNING
RUN
switch
LED LED
WM2000
200 (100 as shipped with base
license; 100 with capacity upgrade
license)
4096
64
500
2Gbps
15956 – Controller with base license
LCT switch
INT LED
Summit WM Technical Reference Guide, Software Version 5.1