Debugging Freeradius - Extreme Networks Summit WM Technical Reference Manual

FreeRADIUS and Security
Configure eap.conf file
The eap.conf file contains general information on the handling of EAP packets that are forwarded to the
RADIUS server. We will cover the configuration of the file for TLS and for PEAP.
For TLS or PEAP the TLS section needs to be completed. This is because even with PEAP authentication
types a secure tunnel is needed from client to server and the TLS section contains the information
required to set this tunnel up. Consider the following configuration file listing:
Figure 26: Example eap.conf file
The TLS section contains pointers to the server certificate file(s) provided from your Certificate
Authority. With the minimal setup shown above (and the properly installed certificates) both TLS and
PEAP are active.

Debugging FreeRADIUS

radiusd -X
radtest
126
Summit WM Technical Reference Guide, Software Version 5.1