Extreme Networks Summit WM Technical Reference Manual page 172

Logs and Events
Table 35: RU_MANAGER (6) logs and events (Continued)
Log ID
13
Minor
33
34
35
37
38
39
40
41
42
172
Log Message
Lost connectivity with
Availability Peer%s.
Internal error occurred for a
single request. RU Manager
will ignore the error and
continue.
Challenge-response key cache
is full. Until some of the
existing access point's are
authenticated, new registration
requests will be ignored.
Internal error occurred for a
single request. RU Manager
will ignore the error and
continue.
SLP registration failed. RU
Manager will retry registration
in 10 seconds.
AC Manager: Unauthorized
client%s attempting to
connect.
AC manager: Unable to set
foreign ports in database.
AC manager: Unable to set
foreign APs in database.
AC Manager: Unable to update
foreign APs in database.
Access point%s attempting to
connect but maximum licensed
connections reached.
Comment
Controller entering into
Failover Mode. Indicates that
link with peer controller has
been lost. Peer controller may
have shutdown or may indicate
problem with interconnecting
network. If Peer controller has
indeed failed and network
connections are intact APs will
now begin failing to surviving
controller.
Failure to process AP
registration request. AP will
likely retry.
Temporary congestion of AP
registration requests. Problem
should resolve itself.
Failure to process AP
registration request. AP will
likely retry.
Failure to register AP SLP
discovery identifiers. APs may
not be able to find controller.
Problem should fix itself and
APs will continue to retry.
Unregistered Peer attempting
to establish an availability pair.
Possible misconfiguration in
Availability pairings.
Possible failure to update
availability pair configuration.
May affect APs ability to
failover properly and
expediently.
Possible failure to register
Failed over APs. May affect
software licensing and AP
registration.
"Availability"
Licensed software licence
reached. Additional APs may
not become Active therefore
affecting intended coverage
area.
Summit WM Technical Reference Guide, Software Version 5.1
Action
Investigate state of peer
controller. Review log entries
on it to determine appropriate
action.
If problem persists contact
Technical Support to
investigate.
If problem persists contact
Technical Support to
investigate.
If problem persists contact
Technical Support to
investigate.
If problem persists contact
Technical Support to
investigate.
Verify Availability pairing
configuration in both
controllers. If indeed
configuration is correct,
contact Technical Support to
investigate.
If problem persists contact
Technical Support to
investigate.
If problem persists contact
Technical Support to
investigate.
If problem persists contact
Technical Support to
investigate.
Validate License Key
parameters. Contact Sales
Support to discuss options on
capacity increase.