Ru_Manager (6) - Extreme Networks Summit WM Technical Reference Manual

Table 34: SECURITY_MANAGER (4) logs and events (Continued)
Log ID Log Message
255 Failed to delete EAP session
for sessionId %d

RU_MANAGER (6)

Table 35: RU_MANAGER (6) logs and events
Log ID Log Message
Critical
1 RU Manager has suffered a
critical internal error and will
halt (unable to start process
thread).
2 RU Manager has suffered a
critical internal error and will
halt (unable to open data
dictionary).
3 AC Manager: Moving into
failover mode
Major
9 An AP has attempted to
connect that is unknown to the
system. AP authentication
failure.%s.
10 AP fails discovery.%s
11 Access Point failed
registration: Maximum license
limit of APs reached.%s
12 Remote Access Point failed
registration: Maximum license
limit of APs reached.%s
Summit WM Technical Reference Guide, Software Version 5.1
Comment
Comment
Internal operation problem.
May affect ability of APs to
register with controller.
Component should be
restarted.
Internal operation problem.
May affect ability of APs to
register with controller.
Component should be
restarted.
Controller entering into
Failover Mode. Indicates that
link with peer controller has
been lost. Peer controller may
have shutdown or may indicate
problem with interconnecting
network. If Peer controller has
indeed failed and network
connections are intact APs will
now begin failing to surviving
controller.
AP With incorrect credentials
attempted to register. AP shall
engage in re-discovery and re-
establish proper credentials.
AP has failed the discovery
registration process.
More APs than allowed by MVL
attempted to register with
controller. Some AP may
become unable to provide RF
service
Software licence Mismatch.
More AP attempted to failover
from availability peer.
Recommend systems support
same capacity. Some AP may
become unable to provide RF
service.
Action
Action
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
Investigate state of peer
controller. Review log entries
on it to determine appropriate
action.
If problem persists contact
Technical Support to
investigate.
If problem persists contact
Technical Support to
investigate.
Verify number of APs allowed
by software licence portion of
License. Contact Sales Support
to discuss capacity allowance
increase criteria.
Verify number of APs allowed
by software licence portion of
License. Verify that purchase
limits match on both systems.
Contact Sales support to
discuss allowance increases.
171