Extreme Networks Summit WM Technical Reference Manual page 156

Logs and Events
Table 32: CONFIG_MANAGER (2) logs and events (Continued)
Log ID
4
Major
9
10
11
Minor
33
Info
65
66
70
156
Log Message
An AP has encountered an
error processing configuration.
Error details:%s
Config Manager has
experienced an error which has
prevented it from properly
processing a request. CM will
continue running, however this
error may be an indicator of a
larger system problem. Error
Details:%s
Access point%s has reported a
radar interference violation
on%s. The affected radio(s)
have been placed in auto
channel select mode, and will
not respond to channel
changes until 30min after the
radar interference is last
detected.
AP [%s] has not responded to
a configuration change. The
AP has been sent a reboot
notification.
Config Manager has failed to
process a request. Config
Manager is still running, and
system functionality is not
impaired. Error Details:%s
Shutdown sequence initiated.
Shutting down normally.
New product key has been
applied. Wireless Controller
will be rebooted.
Config succeeded. Serial
number:%s
Comment
Access Point failed to process
configuration set. AP is not
able to provide service. Verify
AP Image version to validate
that controller and AP are
properly matched.
Configuration/Administration
request may not have been
properly processed.
Information. AP has responded
to Radar signal information.
Access Point failed to
acknowledge configuration set.
AP may not be not be able to
provide service. Verify AP
Image version to validate that
controller and AP are properly
matched.
Configuration/Administration
request may not have been
properly processed.
System is shutting down in
response to administration
operation (explicit request,
software upgrade, license key,
etc....)
System is shutting down in
response to administration
operation (explicit request,
software upgrade, license key,
etc....)
System is shutting down in
response to administration
operation (explicit request,
software upgrade, license key,
etc....)
Successful confirmation of AP
configuration.
Summit WM Technical Reference Guide, Software Version 5.1
Action
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
None
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
None
None
None
None