Extreme Networks Summit WM Technical Reference Manual page 176

Logs and Events
Table 36: RADIUS_CLIENT (7) logs and events (Continued)
Log ID
39
40
41
42
Info
65
66
67
68
69
Trace
129
130
131
176
Log Message
Invalid radius server port
number for subnet%d. Default
value will be used.
Invalid NAS port number for
subnet%d. Default value will
be used.
Mismatched IP addresses:%s
WPA2 pre-authentication
failure.%s.
RADIUS server authenticated
login (Access Accepted).
RADIUS server rejected login
(Access Rejected).
Radius Request: %s
Radius Response: %s
WPA2 pre-authentication
success. %s.
Sent RADC_WM-
AD_CONFIG_REQ.
Received message from CM:
cia_type %d, type %d.
Got CP_Entry[%d]:wm-
ad_id:%d,flags:%d,radius_svr_i
p:%d,rad_svr_port:%d,nas_ip:
%d,nas_port:%d,authtype:%d
Comment
Possible problem with
configuration or availability of
Radius Server or WM-AD
configuration of radius
parameters. Default parameters
will be used. If default value
doesn't provide reachability of
RadiusServer, users may be
unable to authenticate.
Possible problem with
configuration or availability of
Radius Server or WM-AD
configuration of radius
parameters. Default parameters
will be used. No expected
impact to user authentication.
Possible problem with
configuration or availability of
Radius Server or WM-AD
configuration of radius
parameters. Default parameters
will be used. No expected
impact to user authentication.
User failed authentication.
User authentication successful
User failed authentication
Radius Authentication State
Radius Authentication State
Radius Authentication State
Summit WM Technical Reference Guide, Software Version 5.1
Action
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition.
Verify Reachability of
RadiusServer utilizing the
RadiusTest feature in
GlobalSettings. If problem
persists contact Technical
Support to investigate.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition.
Verify Reachability of
RadiusServer utilizing the
RadiusTest feature in
GlobalSettings. If problem
persists contact Technical
Support to investigate.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition.
Verify Reachability of
RadiusServer utilizing the
RadiusTest feature in
GlobalSettings. If problem
persists contact Technical
Support to investigate.
Validate user credentials
configuration. If problem
persist with proper user
configuration contact Technical
Support to investigate
None
Validate user credentials
configuration. If problem
persist with proper user
configuration contact Technical
Support to investigate.
None
None
None