Extreme Networks Summit WM Technical Reference Manual page 151

Table 31: EVENT_SERVER (1) logs and events (Continued)
Log ID Log Message
20 Cannot reset file pointer to
beginning of the log file - Error
no:%d. The message and
subsequent messages will be
dropped.
21 Trying to read non-empty file -
Error no:%d. Message will be
dropped.
22 Cannot reset audit file pointer
to beginning of the audit file -
Error no:%d. The message and
subsequent messages will be
dropped.
23 Cannot set audit file pointer to
specific position in the log -
Error no:%d. The message and
subsequent messages will be
lost.
24 Cannot reset log file pointer to
beginning of log file - Error
no:%d. The message and
subsequent messages will be
dropped.
25 Cannot reset audit file pointer
to specific position in the
audit file - Error no:%d. The
message and subsequent
messages will be dropped.
26 Cannot reset trace file pointer
to beginning of the trace file -
Error no:%d. The message and
subsequent messages will be
dropped.
27 Cannot reset trace file pointer
to specific position in the trace
file - Error no:%d. The
message and subsequent
messages will be dropped.
28 Message has been written to
the log but an error was
encountered when closing the
file - Error no:%d.
29 Unable to open AP detection
log file - Error no:%d. Message
will be dropped.
30 Unable to determine AP
detection log file size - Error
no:%d. Message will be
dropped.
Summit WM Technical Reference Guide, Software Version 5.1
Comment
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Internal Component Failure.
Log system may not be
working properly. Failed to log
configuration change.
Failure in Rogue AP Detection
Logging. Reporting of rogue
devices may be affected. Only
relevant if Summit WM series
Spy is enabled.
Failure in Rogue AP Detection
Logging. Reporting of rogue
devices may be affected. Only
relevant if Summit WM series
Spy is enabled.
Action
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
151