Extreme Networks Summit WM Technical Reference Manual page 88

Hardware maintenance
Powering off the Summit WM Controller WM200/2000
To power off the Summit WM Controller WM200/2000:
1 Login on the Summit WM GUI.
2 From the main menu, click Summit Controller Configuration. The Summit Controller
Configuration page is displayed.
3 Under System Shutdown, select Halt System, and then click Apply Now. The following dialogue
box is displayed.
4 Click OK. The software's operations is halted and you are logged out of the system.
NOTE
An alternative method of stopping the software operation is to use the CLI commands. For more information, see
the Summit WM CLI Reference Guide.
88
Summit WM Technical Reference Guide, Software Version 5.1