Rf_Data_Collector (36) - Extreme Networks Summit WM Technical Reference Manual

RF_DATA_COLLECTOR (36)

Table 45: RF_DATA_COLLECTOR (36) logs and events
Log ID Log Message
Critical
1 An error has occurred in the
RF Data Collector which will
cause this component to
shutdown (and be restarted by
the system). Details:%s.
Major
9 An error has occurred in the
RF Data Collector. This error
will be ignored and the
component will attempt to
continue. Details:%s.
Minor
33 An error has occurred in the
RF Data Collector which will
not interfere with system
processing. This error will be
ignored and processing
continued. Details:%s.
Info
65 Received scan request with
req_id of zero
Poll timeout with INS session
Connection with INS is up
Connection with INS is down
Summit WM Technical Reference Guide, Software Version 5.1
Comment
Internal operation error. Rogue
AP scan updates may be
temporarily suspended. Should
resume once component is
automatically restarted by the
system's health monitor.
Internal operation error. Relay
of Rogue AP scan updates may
be temporarily suspended.
Internal operation error. Relay
of Rogue AP scan updates may
be temporarily suspended.
Possible operational error for
Summit WM series Spy
feature.
Possible operational error for
Summit WM series Spy
feature.
Link with INS state (Summit
WM series Spy)
Possible operational error for
Summit WM series Spy
feature.
Action
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
If problem persists Contact
Technical Support for
investigation.
Determine if outage was
caused by configuration
change to Summit WM series
Spy feature (add/Remove of
controllers from Scan Domain).
Determine if outage was
caused by network path
interruption. If interruption was
caused by failure of INS
controller, please review the
log of that controller to
determine appropriate action.
None
Determine if outage was
caused by configuration
change to Summit WM series
Spy feature (add/Remove of
controllers from Scan Domain).
Determine if outage was
caused by network path
interruption. If interruption was
caused by failure of INS
controller, please review the
log of that controller to
determine appropriate action.
193