Extreme Networks Summit WM Technical Reference Manual page 142

DRM – Dynamic Radio Management
6 Click Save.
7 Wait a few minutes until the system stabilizes, and then verify if the selected Tx power is adequate
by doing one of the following (or both):
Perform a quick site survey (just test a few points) to verify that the coverage is adequate.
●
Compare the Tx Power in the Active Altitude APs display with the Tx Power recommended
●
during the site survey
8 Perform any adjustments as required:
If the Tx power for a Wireless AP must be raised, increase the Auto Tx Power Ctrl Adjust setting.
●
NOTE
If the Tx power reaches its maximum, further increasing the
effect. This may be a sign that the Tx power must be increased on other Wireless APs or that a new Wireless AP
has to be added to the network.
142
Auto Tx Power Ctrl Adjust
Summit WM Technical Reference Guide, Software Version 5.1
setting will have no