Extreme Networks Summit WM Technical Reference Manual page 162

Logs and Events
Table 34: SECURITY_MANAGER (4) logs and events (Continued)
Log ID
68
69
70
71
72
73
74
75
162
Log Message
Cannot connect to Radius
Client. Will keep trying until
connection is successful.
Cannot connect to EAP. Will
keep trying until connection is
successful.
Internal communication failure
- cannot make internal data
connection. Will keep trying
until connection is successful.
Error on socket select. The
socket must have already been
closed.This should not impact
whether an authentication
request succeeds or fails for a
session.
Error accepting new socket.
Will not be able to receive
login information from Apache
server.
Error trying to send a message
to Radius Client. Captive portal
authentication request will fail.
Send
SECMGR_MU_AUTHENTICATE
D_NOTIFY message failed for
token%d
Received failure from Config
Manager for default filter -
configuration is incorrect or
incomplete!
Comment
Inter-communications issue.
Component re-attempts should
restore proper link. However, if
un-resolved will not allow
authentication to proceed and
therefore blocking any users
from gaining proper access to
network.
Inter-communications issue.
Component re-attempts should
restore proper link. However, if
un-resolved will not allow EAP
(WPA) authentication to
proceed and therefore blocking
any users in AAA assigned
WM-ADs.
Internal interprocess
communication issue.
Internal interprocess
communication issue.
Internal interprocess
communication issue. Users
authenticated via internal
captive portal may not reach
authenticated state even with
proper credentials. Component
may need to be restarted.
Internal interprocess
communication issue. Users
authenticated via internal
captive portal may not reach
authenticated state even with
proper credentials. Component
may need to be restarted.
Internal interprocess
communication issue. Users
authenticated via internal
captive portal may not reach
authenticated state even with
proper credentials. Component
may need to be restarted.
Internal configuration issue
encountered. User filter policy
will be applied as "Default"
rather than more specific
filterID indicated through
radius authentication. User
network access to network may
be different than
administration intended.
Summit WM Technical Reference Guide, Software Version 5.1
Action
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.