Feature Capacities; Mobility; Availability - Extreme Networks Summit WM Technical Reference Manual

Table 3: Altitude Access Point system capacities (Continued)
Limit
Max voice calls per radio Wireless to Wired
NOTE
The maximum number of simultaneous transmissions per radio (TKIP) limits are version dependent as follows:
• V1.x – Maximum 16 TKIP clients, maximum 112 WEP/AES/none
• V4.x/V5R1– Maximum 24 TKIP clients, maximum 112 WEP/AES/none

Feature capacities

Mobility

Table 4: Mobility capacities
Limit Value
Max. # of Summit 12 (1 Manager + 11 Agents)
WM Controllers per
mobility domain
Max. # of systems 4096 – WM1000/WM2000
roamed
2048 – WM100/WM200
Max. # of 1Gbps – WM1000, WM200/
aggregated mobility 2000
bandwidth
100 Mpbs – WM100
200 Mbps - WM20

Availability

Table 5: Availability capacities
Limit
Max # systems per
availability cluster
Max # APs per failover
Failover time
Summit WM Technical Reference Guide, Software Version 5.1
Values
2
200
100
75
32
200 APs – 1 Minute
450/451
WL2 11b/g = 8;
Spectralink 11b/g = 12
Comments
Mobility domains can consist of WM100/WM1000/
WM20/WM200/2000 platforms.
Each respective platform can accept only an equal
amount of users equivalent to its local capacity.
The maximum aggregated bandwidth is dependent
on the bandwidth of the physical interface on which
the inter-controller tunnel link is being established.
Note: In most cases the interface bandwidth is being
shared with other system operations (such as AP
tunnelling aggregation).
Platforms
Availability feature is supported in paired mode.
WM1000/WM2000
Note:Failover limit is limited by the capacity of the
controller category in question
WM200
WM100
WM20
WM1000/WM2000
350-2i/350-2d
WL2 11b/g = 8;
Spectralink 11b/g = 12
15