Stats_Server (3) - Extreme Networks Summit WM Technical Reference Manual

Table 32: CONFIG_MANAGER (2) logs and events (Continued)
Log ID Log Message
Config failed. Serial
number:%s
Unable to retrieve MAC
address from AP
Upgrading AP%s image
from%s to%s
Software version matches.
Serial number:%s
Cannot send syslog enable
notify.
Software config response sent
out. Serial number:%s
Upgrading Sensor (%s) image
to ftp:%s to path:%s
Initial channel report has been
successfully sent to AP. Serial
number:%s
Subsequent channel report has
been successfully sent to AP.
Serial number:%s
Trace
129 entering handler for CIA
message %d
130 %s

STATS_SERVER (3)

Table 33: STATS_SERVER (3) logs and events
Log ID Log Message
Critical
1 Statistics Server suffered an
internal connection failure.
Retrying connection in 5
seconds.
Summit WM Technical Reference Guide, Software Version 5.1
Comment
Access Point upgrade fails. AP
may be prevented to register
with controller due to
configuration mismatch.
AP reports may be affected.
Will not be able to determine
BSSID for WM-AD assignment
reports. Other feature impact
such as RogueAP
AP Image upgrade.
Ap is running adequate
firmware version. AP
Registration will proceed
Possible impact to Log System
configuration in terms of
logging to external log system.
Retry applying syslog
configuration.
Configuration of AP
AP role change
AP Channel report Feature
AP Channel report Feature
Comment
Internal Component Problem.
Stats Server unable to
establish proper inter-process
communications. May affect
system status reports, user
accounting and CDRs.
Action
If problem persists, contact
Technical Support to
investigate.
If problem persists, contact
Technical Support to
investigate.
None
None
If problem persists, contact
Technical Support to
investigate.
None
None
None
None
Action
If problem persists, contact
Technical Support to
investigate.
157