Show Authen Application - Extreme Networks EAS 100-24t Switch CLI Manual

config authen application
Parameters
Restrictions
Example usage:
To configure the default method list for the Web interface:
#config authen application http login default
Command: config authen application http login default
Success.
#

show authen application

Purpose
Syntax
Description
Parameters
Restrictions
Extreme Networks EAS 100-24t Switch CLI Manual
application – Choose the application to configure. The user may choose one
of the following five options to configure.
console – Choose this parameter to configure the command line interface
login method.
telnet – Choose this parameter to configure the telnet login method.
ssh – Choose this parameter to configure the Secure Shell login method.
http – Choose this parameter to configure the Web interface login method.
all – Choose this parameter to configure all applications (console, telnet, ssh,
web) login method.
login – Use this parameter to configure an application for normal login on the
user level, using a previously configured method list.
enable - Use this parameter to configure an application for upgrading a normal
user level to administrator privileges, using a previously configured method
list.
default – Use this parameter to configure an application for user authentication
using the default method list.
method_list_name <string 15> - Use this parameter to configure an application
for user authentication using a previously configured method list. Enter an
alphanumeric string of up to 15 characters to define a previously configured
method list.
Only Administrator-level users can issue this command.
Used to display authentication methods for the various applications on the
switch.
show authen application
This command is used to display all of the authentication method lists (login,
enable administrator privileges) for switch configuration applications (console,
telnet, SSH, Web) currently configured on the switch.
None.
None.
Access Authentication Control Commands
267