Chapter 4: Management
config snmp system_name
Restrictions
Example usage:
To configure the switch name for "MainSwitch":
#config snmp system_name MainSwitch
Command: config snmp system_name MainSwitch
Success.
#
enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RMON:
#enable rmon
Command: enable rmon
Success.
#
disable rmon
Purpose
Syntax
Description
Parameters
Restrictions
88
Only Administrator-level users can issue this command.
Used to enable RMON on the switch.
enable rmon
This command is used, in conjunction with the disable rmon command below,
to enable and disable remote monitoring (RMON) on the switch.
None.
Only Administrator-level users can issue this command.
Used to disable RMON on the switch.
disable rmon
This command is used, in conjunction with the enable rmon command above,
to enable and disable remote monitoring (RMON) on the switch.
None.
Only Administrator-level users can issue this command.
Extreme Networks EAS 100-24t Switch CLI Manual