Show Lldp Remote_Ports - Extreme Networks EAS 100-24t Switch CLI Manual

To display outbound LLDP advertisements for specific ports in normal mode:
show lldp local_ports 1 mode normal
Command: show lldp local_ports 1 mode normal
Port ID : 1
-------------------------------------------------------------------------
Port Id Subtype
Port Id
Port Description
Port 1
Port VLAN ID
Management Address Count
PPVID Entries Count
VLAN Name Entries Count
Protocol Identity Entries Count
MAC/PHY Configuration/Status
Power Via MDI
Link Aggregation
Maximum Frame Size
#
To display outbound LLDP advertisements for specific ports in brief mode:
#show lldp local_ports 1 mode brief
Command: show lldp local_ports 1 mode brief
Port ID : 1
-------------------------------------------------------------------------
Port Id Subtype
Port Id
Port Description
Port 1
#

show lldp remote_ports

Purpose
Syntax
Description
Parameters
Extreme Networks EAS 100-24t Switch CLI Manual
: Local
: 1/1
: Extreme Networks EAS 100-24t R1.00
: 1
: 1
: 0
: 1
: 0
: (See detail)
: (See detail)
: (See detail)
: 1536
: Local
: 1/1
: Extreme Networks EAS 100-24t R1.00
Used to display the information learned from the neighbor.
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
This command is used to display the information learned from the neighbor
parameters.
A maximum of 32 VLAN Name entries and 10 Management Address entries
can be received.
<portlist> - Specify a range of ports to be configured.
When a port list is not specified, information for all ports will be displayed.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default display
mode.
detailed - Display the information in detailed mode.
LLDP Commands
61