Clear Log; Show Log; Enable Syslog - Extreme Networks EAS 100-24t Switch CLI Manual

Chapter 4: Management

clear log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the log information:
#clear log
Command: clear log
Success.
#

show log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the switch history log:
#show log index 1-5
Command: show log index 1-5
Index Data Time
----- ---------- -------- ------------------------------------------------------
3 0000-00-00 00:02:43 Successful login through Console (Username: admin)
2 0000-00-00 00:00:43 System cold start
1 0000-00-00 00:00:38 Port 1 link up, 100Mbps
#

enable syslog

Purpose
Syntax
94
Used to clear the switch's history log.
clear log
This command is used to clear the switch's history log.
None.
Only Administrator-level users can issue this command.
Used to display the switch history log.
show log {index <value_list X-Y>}
This command is used to display the contents of the switch's history log.
index <value_list X-Y> - This command will display the history log, beginning
and ending at the value specified by the user in the <value_list X-Y> field.
If no parameter is specified, all history log entries will be displayed.
None.
Log Text
Used to enable the system log to be sent to a remote host.
enable syslog
FULL duplex
Extreme Networks EAS 100-24t Switch CLI Manual