Create Account; Basic Switch Commands - Extreme Networks EAS 100-24t Switch CLI Manual

Command
delete account
show session
show switch
show serial_port
config serial_port
enable clipaging
disable clipaging
enable telnet
disable telnet
telnet
enable web
disable web
save
reboot
reset
login
logout
clear
enable jumbo_frame
disable jumbo_frame
show jumbo_frame
Each command is listed, in detail, in the following sections:

create account

Purpose
Syntax
Description
Parameters
Restrictions
Extreme Networks EAS 100-24t Switch CLI Manual
Parameters
<username>
{baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
{<tcp_port_number 1-65535>}
<ipaddr> {tcp_port <value 0-65535>}
{<tcp_port_number 1-65535>}
{[config | log | all]}
{force_agree}
{[config | system]} {force_agree}
Used to create user accounts.
create account [admin | user] <username 15>
This command is used to create user accounts that consist of a username of
1 to 15 characters and a password of 0 to 15 characters. Up to eight user
accounts can be created.
admin <username> – Name of the administrator account.
user <username> – Name of the user account.
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.

Basic Switch Commands

17