Show Ssl Cachetimeout; Show Ssl - Extreme Networks EAS 100-24t Switch CLI Manual

config ssl cachetimeout
Description
Parameters
Restrictions
Example usage:
To set the SSL cachetimeout for 7200 seconds:
#config ssl cachetimeout timeout 7200
Command: config ssl cachetimeout timeout 7200
Success.
#

show ssl cachetimeout

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the SSL cache timeout on the switch:
#show ssl cachetimeout
Command: show ssl cachetimeout
Cache timeout is 600 second(s).
#

show ssl

Purpose
Syntax
Extreme Networks EAS 100-24t Switch CLI Manual
This command is used to set the time between a new key exchange between
a client and a host using the SSL function. A new SSL session is established
every time the client and host go through a key exchange. Specifying a longer
timeout will allow the SSL session to reuse the master key on future
connections with that particular host, therefore speeding up the negotiation
process.
cachetimeout <value 60-86400> - Enter a timeout value between 60 and
86400 seconds to specify the total time an SSL key exchange ID stays valid
before the SSL module will require a new, full SSL negotiation for connection.
The default cache timeout is 600 seconds
Only Administrator-level users can issue this command.
Used to show the SSL cache timeout.
show ssl cachetimeout
This command is used to view the SSL cache timeout currently implemented
on the switch.
None.
None.
Used to view the SSL status and the certificate file status on the switch.
show ssl {certificate}
SSL Commands
301