Create Snmp Community - Extreme Networks EAS 100-24t Switch CLI Manual

Example usage:
To display SNMP view configuration:
#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
--------------------
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries : 8
#

create snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Extreme Networks EAS 100-24t Switch CLI Manual
Subtree
-----------------------
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
Used to create an SNMP community string to define the relationship between
the SNMP manager and an agent. The community string acts like a password
to permit access to the agent on the switch. One or more of the following
characteristics can be associated with the community string:
An MIB view that defines the subset of all MIB objects that will be accessible
to the SNMP community.
read_write or read_only level permission for the MIB objects accessible to the
SNMP community.
create snmp community <community_string 32> view <view_name 32>
[read_only | read_write]
This command is used to create an SNMP community string and to assign
access-limiting characteristics to this community string.
<community_string 32> - An alphanumeric string of up to 32 characters that is
used to identify members of an SNMP community. This string is used like a
password to give remote SNMP managers access to MIB objects in the
switch's SNMP agent.
view <view_name 32> - An alphanumeric string of up to 32 characters that is
used to identify the group of MIB objects that a remote SNMP manager is
allowed to access on the switch.
read_only - Specifies that SNMP community members using the community
string created with this command can only read the contents of the MIBs on
the switch.
read_write - Specifies that SNMP community members using the community
string created with this command can read from and write to the contents of
the MIBs on the switch.
Only Administrator-level users can issue this command.
Network Management (SNMP) Commands
View Type
----------
Included
Included
Included
Included
Included
Included
Excluded
Included
73