Show Mld_Snooping Group; Show Mld_Snooping Mrouter_Ports - Extreme Networks EAS 100-24t Switch CLI Manual

Chapter 5: Layer 2 Features

show mld_snooping group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display MLD snooping groups:
#show mld_snooping group
Command: show mld_snooping group
Source/Group :
VLAN Name/VID :
Port Member :
Mode :
Source/Group :
VLAN Name/VID :
Port Member :
Mode :
Source/Group :
VLAN Name/VID :
Port Member :
Mode :
#

show mld_snooping mrouter_ports

Purpose
Syntax
Description
154
Used to display the current MLD snooping group configuration on the switch.
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vidlist>]}
This command is used to display the current MLD snooping group
configuration on the switch.
<vlan_name 32> - The name of the VLAN to view MLD snooping group
configuration information.
<vidlist> - The VIDs to view MLD snooping group configuration information.
If no parameters are specified, the system will display all current MLD group
snooping configurations of the switch.
None.
2000::100:10:10:5/FF0E::100:0:0:20
default/1
1-2
INCLUDE
2000::100:10:10:5/FF0E::100:0:0:20
default/1
3
EXCLUDE
NULL/FF0E::100:0:0:21
default/1
4-5
EXCLUDE
Used to display the currently configured router ports on the switch.
show mld_snooping mrouter_ports {[vlan <vlan_name 32> | vlanid
<vidlist>]} {[static | dynamic | forbidden]}
This command is used to display the currently configured router ports on the
switch.
Extreme Networks EAS 100-24t Switch CLI Manual