Create Snmp View; Delete Snmp View - Extreme Networks EAS 100-24t Switch CLI Manual

Example usage:
To display the SNMP users currently configured on the switch:
#show snmp user
Command: show snmp user
Username Group Name
--------------- ---------------
initial initial
Total Entries: 1
#

create snmp view

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
#create snmp view exnview 1.3.6 view_type included
Command: create snmp view exnview 1.3.6 view_type included
Success.
#

delete snmp view

Purpose
Syntax
Extreme Networks EAS 100-24t Switch CLI Manual
SNMP Version Auth-Protocol PrivProtocol
------------ ------------- ------------
V3
Used to assign views to community strings to limit which MIB objects and
SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included | excluded]
This command is used to assign views to community strings to limit which MIB
objects an SNMP manager can access.
<view_name 32> - An alphanumeric string of up to 32 characters that
identifies the SNMP view that will be created.
<oid> - The object ID that identifies an object tree (MIB tree) that will be
included or excluded from access by an SNMP manager.
view type – Sets the view type to be:
included - Include this object in the list of objects that an SNMP manager can
access.
excluded - Exclude this object from the list of objects that an SNMP manager
can access.
Only Administrator-level users can issue this command.
Used to remove an SNMP view entry previously created on the switch.
delete snmp view <view_name 32> [all | <oid>]
Network Management (SNMP) Commands
None None
71