Config Terminal_Line; Show Terminal_Line - Extreme Networks EAS 100-24t Switch CLI Manual

Chapter 3: Fundamentals
traceroute
Restrictions
Example usage:
To trace the routed path between the switch and 10.48.74.121:
#traceroute 10.48.74.121 probe 3
Command: traceroute 10.48.74.121 probe 3
1 <10 ms. 10.48.74.121
1 <10 ms. 10.48.74.121
1 <10 ms. 10.48.74.121
#

config terminal_line

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the terminal line to display 30 rows:
#config terminal_line 30
Command: config terminal_line 30
Success.
#

show terminal_line

Purpose
Syntax
Description
Parameters
Restrictions
38
Only Administrator-level users can issue this command.
Used to configure the number of rows which can be displayed on a screen.
config terminal_line [default | <value 20-80>]
This command is used to configure the number of rows which can be
displayed on a screen. The default value is 24.
None.
Only Administrator-level users can issue this command.
Used to show the number of rows which can be displayed on the screen.
show terminal_line
This command is used to show the number of rows which can be displayed on
the screen.
None.
None.
Extreme Networks EAS 100-24t Switch CLI Manual