Pim Static Rp Settings - D-Link DES-6500 - Switch User Manual

PIM Static RP Settings

This window is used to view the Static RP settings for this router. To view this window, click Configuration > Layer 3 IP
Networking > IP Multicast Routing Protocol > PIM Protocol > PIM Static RP Settings.
To configure the settings for this window and set this router as the Static RP, click the Add button, which will reveal the
following window for the administrator to configure.
The following fields can be set:
Parameter
Group Address
Group Mask
RP Address
Click Apply to set the static RP.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 6- 161. PIM Static RP Settings window
Figure 6- 162. PIM Static RP Settings – Add window
Description
Enter the multicast group IP address to identify who is the RP. This address must be a class
D address.
Enter the mask for the Group address stated above.
Enter the RP's IP address to be set for the Group Address stated above.
174