To delete an Enable Method List defined by the user, click the
be deleted. To modify an Enable Method List, click on its hyperlinked Method List Name. To configure a Method List, click the
Add button.
Both actions will result in the same screen to configure:
To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 7- 2 . Enable Method List - Edit window
0
Figure 7- 2 . Enable Method List - Add window
1
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four (4) of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be authenticated using the
•
local enable password database on the Switch. The local enable password must be set by
the user in the next section entitled Local Enable Password.
none - Adding this parameter will require no authentication to access the Switch.
•
radius - Adding this parameter will require the user to be authenticated using the
•
RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated using the
•
TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated using the
•
XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated using the
•
TACACS protocol from a remote TACACS server.
server_group - Adding a previously configured server group will require the user to be
•
authenticated using a user-defined server group previously configured on the Switch.
under the Delete heading corresponding to the entry desired to
198