xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Firmware Upgrade
This screen is used to upgrade firmware from the Commander Switch to the Member Switch. To access the following window,
click Single IP Management > Firmware Upgrade. Member Switches will be listed in the table and will be specified by Port
(port on the CS where the MS resides), MAC Address, Model Name and Version. To specify a certain Switch for firmware
download, click its corresponding check box under the Port heading. To update the firmware, enter the Server IP Address where
the firmware resides and enter the Path/Filename of the firmware. Click Download to initiate the file transfer.
Figure 11- 1 . Firmware Upgrade window
8
Configuration File Backup/Restore
This screen is used to upgrade configuration files from the Commander Switch to the Member Switch using a TFTP server.
Member Switches will be listed in the table and will be specified by Port (port on the CS where the MS resides), MAC Address,
Model Name and Version. To specify a certain Switch for upgrading configuration files, click its corresponding radio button
under the Port heading. To update the configuration file, enter the Server IP Address where the file resides and enter the
Path/Filename of the configuration file. Click Download to initiate the file transfer from a TFTP server to the Switch. Click
Upload to backup the configuration file to a TFTP server.
Figure 11- 1 . Configuration File Backup/Restore window
9
273