D-Link DES-6500 - Switch User Manual page 102

VLAN
Source MAC
Destination MAC
802.1p
Ethernet type
The page shown below is the IP Access Profile Configuration page.
The following parameters can be set, for IP:
Parameter Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 8.
Profile ID (1-8)
Type Select profile based on Ethernet (MAC Address), IP address, Packet Content Mask or IPv6. This
will change the menu according to the requirements for the type of profile.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
•
Select IP to instruct the Switch to examine the IP address in each frame's header.
•
Select Packet Content Mask to specify a mask to hide the content of the packet header.
•
Select IPv6 to instruct the Switch to examine the IPv6 part of each packet header.
•
Selecting this option instructs the Switch to examine the VLAN identifier of each packet
header and use this as the full or partial criterion for forwarding.
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Selecting this option instructs the Switch to examine the 802.1p priority value of each packet
header and use this as the criterion, or part of the criterion for forwarding.
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Figure 6- 56. Access Profile Configuration (IP)
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
•
Select IP to instruct the Switch to examine the IP address in each frame's header.
•
Select Packet Content Mask to specify a mask to hide the content of the packet header.
•
87