D-Link DES-6500 - Switch User Manual page 299

Step 2
Remove all DES-6504/DES-6508/DES-6510/DES-6512 line cards from the slots in the chassis switch. Next enter the "reset
system" command and the whole system should reboot with stacking in tact. Enter the "show stack_information" command to
verify that the switch has completely removed the line card from the chassis.
DES-6500:4#reset system
Command: reset system
Are you sure you want to proceed with the system reset? (y/n)
(reset all, save, reboot) y
Reboot & Load Factory Default Configuration.....
Saving all configurations to NV-RAM........Done
DES-6500:4#show stack_information
Command: show stack_information
Box
ID Type
--- -----------
1 DES-6505
2 DES-6507
3 USR-NOT-CFG
4 USR-NOT-CFG
5 USR-NOT-CFG
6 USR-NOT-CFG
7 USR-NOT-CFG
8 USR-NOT-CFG
--------------------------------------------------------------------------------------------------
Topology
Current state :MASTER
Box Count
DES-6500:4#
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Exist
-----
exist
exist
no
no
no
no
no
no
:STAR
:2
Prio- Prom Runtime
rity version version
----- -------- --------
16 2.00-B20 3.00-B33
16 2.00-B20 3.00-B33
284
H/W
version
--------
0A1
3A1