Dns Relay Static Settings - D-Link DES-6500 - Switch User Manual

DNSR Cache Status
DNSR Static Table State
Click Apply to implement changes made.

DNS Relay Static Settings

To view the DNS Relay Static Settings, click Configuration > Layer 3 IP Networking > DNS Relay > DNS Relay Static
Settings, which will open the DNS Relay Static Settings window, as seen below:
To add an entry into the DNS Relay Static Table, simply enter a Domain Name with its corresponding IP address and click Add
under the Apply heading. A successful entry will be presented in the table below, as shown in the example above. To erase an
entry from the table, click the
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
This can be toggled between Disabled and Enabled. This determines if a DNS cache will
be enabled on the Switch.
This field can be toggled using the pull-down menu between Disabled and Enabled. This
determines if the static DNS table will be used or not.
Figure 6- 164. DNS Relay Static Settings and Table window
corresponding of the entry to delete.
176