D-Link DES-6500 - Switch User Manual page 115

Figure 6- 73. CPU Interface Filtering Configuration window – Ethernet
Parameter
Profile ID (1-5)
Type
VLAN
Source MAC
Destination MAC
Ethernet type
Click Apply to set this entry in the Switch's memory.
The page shown below is the IP Access Profile Configuration page.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 5.
Select profile based on Ethernet (MAC Address), IP address or Packet Content Mask. This
will change the menu according to the requirements for the type of profile.
•
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
header.
•
Select IP to instruct the Switch to examine the IP address in each frame's header.
•
Select Packet Content Mask to specify a mask to hide the content of the packet
header.
Selecting this option instructs the Switch to examine the VLAN identifier of each packet
header and use this as the full or partial criterion for forwarding.
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
100