Parameter
Backup State
IP Address
Subnet Mask
Gateway IP
Metric (1-65535)
Backup State
Click Apply to implement changes made.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Description
Allows the user to configure the type of IP route entries on the Switch.
Default – Choosing this parameter will allow the user to configure the default gateway for the
next hop router only.
Static – Choosing this parameter will allow the user to create static destination routes.
Allows the entry of an IP address that will be a static entry into the Switch's Routing Table.
Allows the entry of a subnet mask corresponding to the IP address above.
Allows the entry of an IP address of a gateway for the IP address above.
Allows the entry of a routing protocol metric representing the number of routers between the
Switch and the IP address above.
The user may choose between Primary and Backup. If the Primary Static/Default Route
fails, the Backup Route will support the entry. Please take note that the Primary and Backup
entries cannot have the same Gateway.
131