Static Arp Settings - D-Link DGS-3024 Manual

Static ARP Settings

The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. This table
allows network managers to view, define, modify and delete ARP information for specific devices.
Static entries can be defined in the ARP Table. When static entries are defined, a permanent entry is entered and is used to
translate IP address to MAC addresses.
To open the Static ARP Table open the Configuration folder and click on the Static ARP Settings link.
To add a new entry, click the Add button, revealing the following window to configure:
The following fields can be set:
Parameter
IP Address
MAC Address
After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To
completely clear the Static ARP Settings, click the Clear All button.
DGS-3024 Gigabit Ethernet Switch Manual
Figure 7- 61. Static ARP Settings window
Figure 7- 62. Static ARP Table – Add a New Entry window
Description
The IP address of the ARP entry.
The MAC address of the ARP entry.
84