D-Link DES-6500 - Switch User Manual page 293

Once you have verified your Firmware version, check the "show stack_information" command in the CLI interface to view the
runtime codes of the line card modules set in the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
DES-6500:4#show switch
Command: show switch
Device Type : DES-6500 Chassis Ethernet Switch
MAC Address : DA-10-21-00-00-01
IP Address : 10.41.44.22 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.50-B19
Firmware Version : Build 2.00-B20
Hardware Version : 2A1
Device S/N :
System Name : DES-6500_#3
System Location : 7th_flr_east_cabinet
System Contact : Julius_Erving_212-555-6666
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
802.1X : Disabled
Jumbo Frame
Clipaging : Enabled
Port Mirror
SNTP
Boot Relay
DNSR Status
VRRP : Disabled
DVMRP : Disabled
PIM-DM : Disabled
RIP : Disabled
OSPF : Disabled
TELNET : Enabled (TCP 23)
WEB : Enabled (TCP 80)
RMON : Enabled
HOL Prevention State : Enabled
Syslog Global State
DES-6500:4#
: Off
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
278