D-Link DES-6500 - Switch User Manual page 82

Interval The Interval will set the time between Multicast and Broadcast packet counts sent from the Switch's
chip to the Traffic Control function. These packet counts are the determining factor in deciding
when incoming packets exceed the Threshold value. The Interval may be set between 5 and 10
seconds with the default setting of 5 seconds.
Click Apply to implement the settings of each field.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
NOTE: Traffic Control cannot be implemented on ports that are set for Link
Aggregation (Port Trunking).
NOTE: Ports that are in the Shutdown forever mode will be seen as Discarding in
Spanning Tree windows and implementations though these ports will still be
forwarding BPDUs to the Switch's CPU.
NOTE: Ports that are in Shutdown Forever mode will be seen as link down in all
windows and screens until the user recovers these ports.
67