Table of Contents
Advertisement
3. Secure the floor to the chassis with the previously
removed screw.
4. Place the system unit upright and swivel the two chassis
feet out, perpendicular to the system unit.
5. Replace the left side cover (see "Replacing the Minitower
Side Covers").
System Board Options
This section describes how to change options on the system
board. Procedures described in this section include:
T
adding memory modules
T
upgrading the processor
T
replacing the system board.
The following figure shows the locations of the upgrade
sockets on the system board. See Chapter 3 for the location of
the system board jumper settings.
A – Processor Socket
System board sockets
B – System Memory Upgrade Sockets
Installing Options 5-21
Advertisement
Table of Contents
