Audio - Panasonic KX-VC500 Operating Manual

Audio

Problem
The other party cannot hear
your voice.
The sound cuts out.
The sound volume is low or
cannot be heard at all.
You hear audio feedback.
•
The microphone cable is not properly connected.
→
Check that the microphone is properly connected to the unit (Page 19).
Perform self diagnosis, and check the performance of the microphones
that are connected to the unit (Page 94).
•
The microphone is muted.
→
Press [MIC Mute] on the remote control, or press the MIC Mute button
on the Boundary Microphone to unmute the microphone (Page 61).
•
"Default MIC Mute set" is set to "ON".
→
The microphones are muted at the start of a received video conference
call. Confirm the settings (Page 86).
•
The microphone is being obstructed.
→
During the video conference call, do not block the microphone with your
hand or other object.
•
You are too far from a microphone.
→
Speak close to a microphone.
•
More than 5 Boundary Microphones are connected in cascade.
→
Connect no more than 4 Boundary Microphones at a time.
•
There may be a problem with your communication lines.
→
Contact your dealer.
•
You are too far from a microphone.
→
Speak close to a microphone.
•
The microphone or unit is being moved during a video conference call.
→
Do not move the unit or the microphone during a video conference call.
•
The microphone is being obstructed.
→
During the video conference call, do not block the microphone with your
hand or other object.
•
There may be a problem with your communication lines.
→
Contact your dealer.
•
The unit's volume settings are too low.
→
Increase the volume level (Page 60).
Note
•
You can set the volume level of a video conference call before
starting the call. Confirm the settings (Page 88).
•
The other party's microphone has been muted.
→
Have the other party unmute their microphone.
•
The display's volume settings are too low.
→
Increase the volume level of the display.
•
The microphone is too close to the display or to speakers.
→
Keep microphones at least 1 m away from any display or speaker.
•
The display's volume settings are too high.
→
Decrease the volume level of the display.
Cause and Solution
Additional Information
User Manual 129