Panasonic KX-VC500 Operating Manual page 69

Displaying the Sub Video Camera's Image
You can switch the display from the main video camera to a sub video camera during a video conference call.
1 Press [Camera Sub].
•
The sub video camera's image is displayed. The image is
also visible on the other party's display.
Note
•
When connecting to an MCU or non-Panasonic
video conference system, the same image may not
be shown on the other party's display depending on
the other party's screen layout. Ask the other party
to change their screen layout to display your sub
video camera's image.
•
Pressing [Full Screen] on the remote control will
hide or unhide the other party's information,
duration, and guide displays.
•
When connecting to another Panasonic HD Visual
Communication Unit:
–
–
–
While displaying your sub video camera's
image, the other party cannot press [Camera
Sub] to display their own sub video camera's
image.
If a computer is connected you can also switch
to the computer screen's image by pressing
[PC] (Page 64). Only the party that pressed
[Camera Sub] can perform this operation. To
return to displaying your sub video camera's
image, press [Camera Sub].
While displaying your sub video camera's
image, you can switch to displaying the other
party's image in Layout 1 by pressing [B]
(Page 47, Page 49, Page 52). However, the
other party cannot perform this operation, and
the other party cannot confirm if you are viewing
your sub video camera's image or the other
party's image. When viewing the other party's
image, the screen layout is fixed to Layout 1. To
return to displaying your sub video camera's
image, press [B].
Displaying Other Video Sources
1
User Manual
2
69