Note
•
If the manual settings screen is displayed,
press [B] to return to the auto settings
screen.
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [
][
] to select "Yes" and press [Enter].
•
The system settings screen is displayed.
Note
•
Depending on how many Boundary
Microphones are connected, the output
settings differ as follows:
–
2 or more Boundary Microphones:
Monaural output
–
1 Boundary Microphone: Stereo output
7.
Press [Home].
•
The Home screen is displayed.
Setting the MIC Position manually
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Press [
].
•
The second page is displayed.
4.
Use [
][
] to select "MIC Setting" and press
[Enter].
•
The auto settings screen is displayed.
Note
•
If the manual settings screen is displayed,
proceed to step 6.
5.
Press [B].
•
The manual settings screen is displayed.
6.
Use [
][
] to select the Boundary Microphone
you want to configure and press [Enter].
7.
Use [
][
] to select the Boundary Microphone's
relative position.
"Left side": Sounds on left side are played.
"Right side": Sounds on right side are played.
"Center Mono": All sounds are played through
both the left and right speakers at the same volume.
"Center stereo": Sounds centred on the
microphone are played through both the left and
right speakers at the same volume.
Note
•
When a Boundary Microphone is set to
"Center stereo", make sure that it is placed
with its connector facing the display.
•
For the settings shown in the following
diagrams, the left/right channels are
displayed as viewed from the side of the
main video camera.
Here are examples of the relative position of
Boundary Microphones.
Contacts and Settings
User Manual
89