Panasonic KX-VC500 Operating Manual page 57

3 Press the buttons of the remote control to operate the
PTZ camera.
[B]: Zoom out
[R]: Zoom in
[ ][ ]: Pan the camera left/right.
[ ][ ]: Tilt the camera up/down.
•
The movement continues as long as you hold down
the button, and stops when you release the button.
For finer control of the movement, press the button
and immediately release it, and repeat this in
succession.
•
To control another site's PTZ camera, press [Y].
Each time [Y] is pressed, the order of the sites listed
in the site selection dialogue box will change.
Example: During a 4-party video conference call
Site 1
•
To return to the video conference call screen, press
[Back].
Note
•
You can press [Full Screen] on the remote control to display/hide the guide area.
•
In the following cases, you will not be able to control a PTZ camera, even if you press [CAM Ctrl].
–
While contents are being shared.
–
While displaying the unit information screen or the connections status screen.
–
While displaying a dialogue box.
Site 2 Site 3
Site 1
Site 2
Site 3
Controlling a PTZ Camera
User Manual 57