Panasonic KX-VC500 Operating Manual page 70

Displaying Other Video Sources
•
When connecting to an MCU or non-Panasonic
video conference system:
–
–
–
2 Press [Camera Main] to return to showing the main video
camera's image.
Note
•
Only the party that pressed [Camera Sub] can perform
this operation.
Note
•
On the Home screen, you can also display the sub video
camera's image on your display by pressing [Camera Sub].
While the sub video camera's image is displayed, the unit will
not enter screen standby mode. To return to the Home
screen, press [Camera Main].
70 User Manual
Even while displaying your sub video camera's
image, it is also possible for the other party to
start sharing their sub video camera's image. In
this case, note that the other party's sub video
camera's image will be displayed as the other
party's image on your screen.
If a computer is connected, you can also switch
to the computer screen's image by pressing
[PC] (Page 64). To return to displaying your sub
video camera's image, press [Camera Sub]. It
is also possible for the other party to start sharing
their computer's screen. In this case, note that
the other party's computer screen will be
displayed as the other party's image on your
screen.
While displaying your sub video camera's
image, you can switch to displaying the other
party's image in Layout 1 by pressing [B]
(Page 47). To return to displaying your sub video
camera's image, press [R].