Making Audio Input/Output
Settings
Note
•
These settings are for adjusting the audio
handling.
•
"Echo Canceller"and "Auto Gain Control"
should normally be set to "ON". Changing
either of these settings to "OFF" may result in
degradation of the sound quality during a video
conference call.
•
"Output local site sound" should normally be
set to "OFF".
•
When a mic is connected, feedback may occur
if your voice is output through the TV speakers.
In places where a mic is used, do not have your
voice output through the speakers.
1.
Log in to the administrator menu (Page 112).
•
The administrator menu screen is displayed.
2.
When using IP mode:
Press [
] twice.
•
The third page is displayed.
When using NAT Traversal mode:
Press [
].
•
The second page is displayed.
3.
Use [
][
] to select "Audio I/O" and press
[Enter].
•
The audio input/output settings screen is
displayed.
4.
Use [
][
] to select the following items for input:
"Echo Canceller": Use [
to enable the echo canceller feature.
Document Version 2013-09
][
] to select whether
–
"ON" (default): Enables the echo canceller
feature.
–
"OFF": Disables the echo canceller feature.
"Auto Gain Control": Use [
whether to enable the auto gain control feature.
–
"ON" (default): Enables the auto gain control
feature.
–
"OFF": Disables the auto gain control feature.
"Output local site sound": Press [Enter] and use
[
][
] to select the output destination for local
site audio.
–
"OFF" (default): Local site audio is not output.
–
"RCA": Local site audio is output through the
RCA connection.
–
"HDMI": Local site audio is output through the
HDMI connection.
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [
][
] to select "Yes" and press [Enter].
•
The administrator menu screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.
Making GUI Settings
1.
Log in to the administrator menu (Page 112).
•
The administrator menu screen is displayed.
2.
When using IP mode:
Press [
] twice.
•
The third page is displayed.
When using NAT Traversal mode:
Press [
].
•
The second page is displayed.
Contacts and Settings
][
] to select
User Manual
123