Panasonic KX-VC500 Operating Manual page 41

•
You can refer to the contact list when entering the IP
address, SIP URI (or SIP user name), or MCU's
conference room number@IP address, by following
the procedure below (You cannot enter a destination
using the call history.):
1.
Press [G].
•
The contact list screen is displayed.
2.
Use [
refer to.
•
You can use [
of the remote control to select the displayed
tab (Page 38).
3.
Press [Enter].
•
The display returns to the input screen.
7 Press [Start] to start the call.
•
You can also start the call by pressing [Enter].
8 When you want to end the call, press [End].
•
The Home screen is displayed.
][ ] to select the contact you want to
][ ] or the numeric buttons
Starting a Video Conference
User Manual 41